Mindray T series compatible adult clip reusable SPO2 probes

PRODUCT INTRODUCTION

5 different types for below each series available :Adult clip, Pediatric clip, Adult soft, Pediatric soft, Neonate wrap.

Basic performance of product

Lighting tube 660 nm/905 nm/940 nm, maximum output power: 2 mw;

SPO2 test range: 70% ~ 100%; accuracy: ± 3% when 70% ~ 89%, ± 2% when 90% ~ 100%;

Pulse rate test range: 30 ~ 245 bpm;accuracy: ± 3 bpm when 30 bpm-245 bpm;

Application method

·Place this probe over the patient's index or other finger.

·Check to ensure that the optical element is aligned with the test site and flattened.

·Arrange the cable and wrap it with a belt to prevent the probe from falling off.

·Plug this product into the saturation tester and confirm whether it is operated correctly as described in the tester operation manual.

Note

If the sensor cannot stably track the pulse condition, it may be because it is improperly placed, or the sensor is placed too thick, too thin, or has significant pigmentation, or the color is too light due to other reasons (e.g., due to the use of externally colored products such as nail polish, stains, or tinted foundation), so that normal light cannot be transmitted. In any of these cases, reposition the sensor or use a different type of sensor on a different site.

Intended use

The product is indicated for reuse to collect and transmit signal of SpO2 and pulse rate of patient, with compatible monitors or oximeter.